If you own multiple PTZOptics cameras, you can set each one to be controlled independently from (1) IR remote control. The way to do this is to use the IR remote control and issue one of the commands below.


Star (*) pound (#) F1 - sets the cameras IR address to be "camera select 1" 

Star (*) pound (#) F2 - sets the cameras IR address to be "camera select 2"

Star (*) pound (#) F3 - sets the cameras IR address to be "camera select 3" 

Star (*) pound (#) F4 - sets the cameras IR address to be "camera select 4" 

 

Just keep in mind that your IR remote control may accidentally issue this command to other cameras, so while you are setting this up, be sure to power down the cameras that you wish to retain their IR address.