Wirecast Installation (Windows)

  1. Use the included USB A-B cable to connect the TallyLights™ Controller to your computer.
  2. Download the Wirecast for Windows TallyLights™ Controller software
  3. Install the software using the wizard.

 

Wirecast Installation (Mac)

  1. Use the included USB A-B cable to connect the TallyLights™ Controller to your computer.
  2. Download the Wirecast for Mac TallyLights™ Controller software. 
  3. Install the software by dragging the Tally-Lights 1.0 application to the Applications folder. 

 

Wirecast Configuration

  1. Launch Wirecast.
  2. Start up the Wirecast TallyLights™ Controller software.
  3. Use the configuration matrix to map the camera sources to the tally light output.
  4. The setup is complete. The emitters will now trigger when set to Program and Preview through Wirecast.


Table

Description automatically generated